Network Interface Specifications

Wi-Fi

Standard IEEE 802.11 b/g/n; IEEE 802.11n available only on the 20 MHz channel
Security WPA2-PSK (AES); complies with WPA2 with support for WPA/WPA2 Personal

WEP (64/128 bit); not supported for Wi-Fi Direct mode

Frequency range 2.4 GHz
Maximum Radio-Frequency Power Transmitted 20 dBm (EIRP)
Coordination modes Infrastructure mode

Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b

Note: Wi-Fi Direct Simple AP mode available even if you connect the product to an Ethernet network.

Ethernet

Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded Twisted Pair) cable to prevent risk of radio interference

IEEE802.3u (100BASE-TX)

IEEE802.3az (Energy Efficient Ethernet); disabled by default (see link below to enable)
Note: The connected device should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps Half duplex
Connector RJ-45

Security Protocol

SSL/TLS: HTTPS Server/Client, IPPS

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use