Cleaning the Print Head Using the Product Control Panel

You can clean the print head using the control panel on your product.
  1. Load a few sheets of plain paper in the product.
  2. Press the  home button, if necessary.
  3. Select Maintenance. You see a screen like this:


  4. Select Print Head Cleaning. You see a screen like this:


  5. Select Start to clean the print head. When the cleaning cycle is finished, you see a message on the screen.
    Caution:
    Never turn off the product or open the scanner unit during a cleaning cycle or you may not be able to print.
  6. Select Check.
  7. Select Print to print a nozzle check pattern and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing or longer if printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use