Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
Make sure there are no errors on the LCD screen.
Load a few sheets of plain paper in the product.
Press the
home
button, if necessary.
Select
Maintenance
>
Print Head Alignment
.
You see a screen like this:
Select one of the following options:
Vertical Alignment
if your printout is blurry.
Horizontal Alignment
if your printout contains horizontal banding.
Follow the on-screen instructions to print an alignment sheet.
Note:
Do not cancel printing while you are printing head alignment patterns.
Check the printed patterns on the alignment sheet and select the following on the LCD screen, depending on the alignment pattern you printed:
Vertical Alignment
: For each pattern, select the number representing the pattern with the least amount of separation or overlap.
Horizontal Alignment
: Select the number representing the pattern with the least amount of separation or overlap.
Select
Dismiss
.
Parent topic:
Adjusting Print Quality
Was this page helpful?
Yes
or
No
.
Privacy Policy
|
Your California Privacy Rights
|
Terms of Use