||A printer error has occurred. Turn the product off and
then back on again. If the error continues, check for a paper jam.
If there is no paper jam, contact Epson for support.
||A scanner error has occurred. Turn the product off and
then back on again.
||A borderless printing ink pad needs to be replaced.
Contact Epson for support. Borderless printing is not available,
but printing with a border is available.
||Paper is jammed in the product. Remove the jammed
paper, then press the button indicated on the LCD screen to clear
the error. If the error continues, turn the product off and back on
||An ink cartridge is installed incorrectly. Press down
each ink cartridge to make sure it is firmly installed.
||The ink cartridge displayed on the LCD screen is not
recognized by your product. Make sure you installed genuine Epson
||A borderless printing ink pad is nearing the end of its
service life. Contact Epson for support. (To continue printing,
press the start button.)
||To establish a wireless connection using a router or
access point, press the button on the router or access point, or
click the button on its wireless settings screen displayed on your
||Enter the PIN code displayed on the LCD screen into the
router, access point, or computer within two minutes. If you wait
longer than two minutes, a time-out error occurs, the code changes,
and you must enter a new code.
||To make wireless connection settings from your
computer, run the installer and follow the on-screen
||The Paper Setup Auto
Display option is disabled. You must enable Paper Setup Auto Display to use
||Your computer may not support WSD (Web Services for
Devices). The Scan to PC (WSD) function is available only for
computers running English versions of Windows 10, Windows 8.x,
Windows 7, or Windows Vista. Make sure your product is connected
correctly to the computer.
||A firmware update has failed. Connect your product
using a USB cable and try updating the firmware again. If you still
receive this error message, contact Epson for support.