Aligning the Print Head Using the Product Control Panel

You can align the print head using the control panel on your product.
  1. Make sure there are no errors on the LCD screen and the output tray is extended.
  2. Load a few sheets of plain paper in the product.
  3. Press the  home button, if necessary.
  4. Select Maintenance and press the OK button.


  5. Select Print Head Alignment and press the OK button.
  6. Do one of the following:
    • Select Vertical Alignment and press the OK button.
    • Select Horizontal Alignment and press the OK button.
  7. Press the OK button to print an alignment sheet.
    Note: Do not cancel printing while you are printing a head alignment pattern.
  8. Check the printed pattern and select the number representing the most solid printed pattern for each set on the LCD screen.

    Vertical Alignment



    Horizontal Alignment

  9. Press the OK button when you are finished.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use