To keep your
product working at its best, you should clean it several times a
year.
Close the output tray, front cover, and rear paper feed cover when you are not using the product to protect it from dust.
Caution:
Do not use a hard brush, alcohol, or
paint thinner to clean the product or you may damage it. Do not use
oil or other lubricants inside the product or let water get inside
it.
- Turn off the product.
- Unplug the power cable.
- Disconnect any connected cables.
- Remove all the paper.
- Open the document cover.
- Clean the scanner glass with a soft, lint-free cloth
(microfiber is recommended), moistened with a little glass
cleaner.
Caution:Do not spray glass cleaner directly on the glass and do not press the glass surface with any force.
- Close the document cover.
- Clean the outer case and
control panel with a soft, moistened cloth.
Caution:Be careful not to get water onto the printer mechanism or any electrical components; doing so may damage the product.
