Setting the Remote Control ID

The remote control's ID is set to 0 by default so it can operate any compatible projector. If you want to set the remote control to operate only a particular projector, you need to set the remote control's ID to match the projector's ID.
  1. Turn on the projector you want the remote control to operate with exclusively.
  2. Set the remote control ID switch to On.


  3. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. (Enter a two-digit number, such as 01 for projector ID 1.) Then release the buttons.


    Note: If you don't know the projector's ID, hold down the ID button and press the Home button to temporarily display the projector's ID on the screen. If the batteries are left out of the remote control for an extended period, the remote control ID returns to its default setting.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use