Charging the 3D Glasses
When the status light on the glasses flashes red to indicate a low battery, it is time to charge the glasses.
Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.
Do one of the following:
Plug the other end of the charging cable into a powered USB port on a computer or other device.
Plug the other end of the charging cable into a USB-to-AC adapter with the following specifications:
Input: 100-240V, ~0.15A, 50-60Hz
The glasses are fully charged when the status light on the glasses stays green.
Viewing 3D Images
Was this page helpful?
Your California Privacy Rights