To change settings for an input source, make sure the source is connected and select that source.
Setting | Options | Description |
---|---|---|
Color Mode | See the list of available Color Modes | Adjusts the vividness of image colors for various image types and environments |
Brightness | Varying levels available | Lightens or darkens the overall image |
Contrast | Varying levels available | Adjusts the difference between light and dark areas of the image |
Color Saturation | Varying levels available | Adjusts the intensity of the image colors |
Tint | Varying levels available | Adjusts the balance of green to magenta tones in the image |
Sharpness | Standard
Thin Line Enhancement Thick Line Enhancement |
Adjusts the sharpness or softness of image details |
White Balance | Color Temp.
G-M Correction Custom Grayscale |
Color Temp.: sets the
overall color tone; higher values tint the image blue and lower
values tint the image red
G-M Correction: adjusts green or red levels Custom: adjusts the offset and gain for each RGB color Grayscale: adjusts red, green, blue, and brightness levels for the selected adjustment level |
Image Enhancement | — | See the Image
Enhancement settings table in this topic
Note: This
menu is available only with an HDMI connection. |
Advanced | Gamma
RGBCMY |
Selects various detailed color settings
Gamma: adjusts the gamma levels of the image. Select Custom to adjust the gamma while viewing the image or a graph. The horizontal axis of the gamma adjustment graph shows the input signal level, and the vertical axis shows the output signal level. Settings are saved for each type of input source or Color Mode. RGBCMY: adjusts the hue, saturation, and brightness for each color |
Power Consumption | High
Medium ECO |
Selects the brightness mode of the projector lamp
High: sets maximum lamp brightness Medium: reduces the brightness of the lamp ECO: reduces lamp brightness and fan noise, and saves power and lamp life |
Auto Iris | Off
Normal High Speed |
Adjusts the projected luminance based on the image
brightness when certain Color Modes are selected
Note:
Depending on the image, you may hear the Auto Iris operating, but
this is not a malfunction. |
Image Enhancement settings
*1: This can only be set when Signal > Advanced > Image Processing is set to Fine.
*2: This cannot be set when Image Preset Mode is set to Off.
*3: This cannot be set when 4K signals are being input.