Connecting to a Bluetooth Audio Device

You can connect your projector to Bluetooth audio devices such as speakers or headphones to output audio from a streaming device or other video source connected to the projector.
Note: The Bluetooth audio device must be A2DP compliant. There may be a slight delay in audio output. Bluetooth audio devices are not supported in some countries and regions.
Note: When a Bluetooth audio device is paired to the projector, the built-in speaker system (Home Cinema 3800) and the Audio Out port are disabled.
  1. Turn on the projector.
  2. Press the Menu button.
  3. Select the Settings menu and press Enter.


  4. Select HDMI Link and press Enter.


  5. Select Audio Out Device and press Enter.
  6. Select Projector and press Enter.
  7. Press Esc until you return to the Settings menu.
  8. Select Bluetooth and press Enter.


  9. Select Bluetooth Audio and press Enter.
  10. Select On and press Enter.
  11. Press Esc to return to the Bluetooth menu.
  12. Make sure the Bluetooth audio device you want to connect to is in pairing or discovery mode (see your Bluetooth audio device manual for details).
  13. Select Search Bluetooth Device and press Enter to display a list of available devices.


  14. Select the device you want to connect to and press Enter.
  15. Press the Esc button to return to the previous screen or the Menu button to exit the menu.
The next time you turn on the projector, the last connected device is automatically connected. To change the connected device, repeat these steps.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use