Connecting to a Trigger Out Port

You can connect your projector to external devices such as motorized screens that support a trigger signal. When active, a 12V signal is sent to the connected device while the projector is powered on.
Note: The Trigger Out port is available only on the Home Cinema 3800.
  1. Connect a 3.5 mm stereo mini-jack cable to the external device's trigger port. See your device's documentation for details.
  2. Connect the other end to the projector's Trigger Out port.


  3. Turn on the Trigger Out setting in the projector's Extended > Operation menu.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use