After you select menu settings for your projector, you
can transfer them to another projector of the same model.
Note:
Copy the projector's settings before you adjust
the projected image using the projector's Geometry
Correction settings. Any saved
User's Logo setting on the projector will transfer to the other
projector.
Caution:
If the copy process fails due to a power
failure, communication error, or for any other reason, Epson will
not be responsible for any repair costs incurred.
The following settings will not transfer between
projectors:
- Light Source Hours
- Status
The following settings will not transfer between
projectors if you set the
Batch Setup
Range setting to
Limited:
- Password Protection settings
- EDID in the Signal
I/O menu
- Network menu settings
Note: In
addition to the methods covered in this section, you can also copy
and transfer settings to multiple projectors over a network using
the Epson Projector Management software. See the online Epson Projector Management Operation Guide for
instructions. You can download the latest software and
documentation from the Epson website.