Creating a User Pattern to Display

You can transfer an image to the projector and then display it as a pattern to aid in presentations when you use the Pattern Display feature. This transferred image is called the User Pattern.
Note: Once you save a user pattern, you cannot restore the default pattern. You cannot save an image that is protected by HDCP. If a pattern is displayed for a long time, a residual image may be visible in projected images.
  1. Display the image you want to project as the User Pattern from a connected computer or video source.
  2. Press the Menu button, select the Management menu, and press Enter.


  3. Select the User Pattern setting and press Enter. You see a prompt asking if you want to use the displayed image as a User Pattern.
    Note: When you select User Pattern, adjustments such as Keystone, E-Zoom, Aspect, Adjust Zoom, or Image Shift are temporarily canceled.
  4. Select Yes and press Enter.
    Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.
    You see a completion message.
  5. Press Esc to exit the message screen.

To view your user pattern, press the Menu button, select the Display menu, and press Enter. Set the Pattern Type setting to User Pattern, then return to the Display menu and select Pattern Display.

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use