You
can transfer an image to the projector and then display it whenever
the projector turns on. You can also display the image when the
projector is not receiving an input signal or when you temporarily
stop projection. This transferred image is called the User's Logo
screen.
The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by setting up password protection for it.
Note: You
cannot save an image that is protected by HDCP as a User's
Logo.
Note: When
you copy the menu settings from one projector to another using the
batch setup feature, the user logo is also copied. Do not include
any information in the user logo that you do not want to share
between multiple projectors.
- Display the image you want to project as the User's Logo.
-
Press the Menu button, select the Management menu, and press
Enter.
-
Select the User's
Logo setting and press Enter.
- Select Start Setting and press Enter. You see a prompt asking
if you want to use the displayed image as a user's logo.
Note: When you select User's Logo, adjustments such as Geometry Correction, E-Zoom, Aspect, Scale (BrightLink 1485Fi), and Screen Type are temporarily canceled.
-
Select Yes
and press Enter.
Note: Depending on the image signal, the screen size may change to match the resolution of the image signal.
-
Make sure the image appears as you want it,
then select Yes again and press
Enter. You see a completion
message.
- Press Esc to exit the message screen.
-
Select the Display menu and press Enter.
- Select when you want to display the User's Logo screen:
