You
can use the projector's Arc Correction setting to adjust the curve
or arc of the sides of your image.
Note: If you
change the Screen Type setting or
adjust the image position, your image adjustments are
reset.
Turn on the projector and display an
image.
Press the Menu button.
Select the Installation menu and press
Enter.
Select the Geometry Correction setting and press
Enter.
Select the Arc
Correction setting and press Enter. Then select the
Arc Correction setting and
press Enter again. You see the Arc
Correction adjustment screen:
Note: To
reset your adjustments, press the Esc button for at least 2 seconds to display
a reset screen, and select Yes.
Use the arrow buttons on the projector or the
remote control to select the corner or side of the image you want
to adjust. Then press Enter.
Press the arrow buttons to adjust the image
shape as necessary.
When you are finished, press Esc.
Note: To save
the current image shape, select Memory > Save
Memory. You can save up to three image shapes in the
projector's memory.