Saving Pages in Whiteboard Mode

You can save your whiteboard pages as JPG, PDF, PNG, or EWF2 files and select the location where you want to store your files.
Note: You must first set up the Save settings in the projector's Interactive menu. For best results, connect directly to the projector or control pad (BrightLink 1485Fi) to save whiteboard pages. You may not be able to use USB flash drives that incorporate security functions.
  1. Select the Other Tools icon on the projector toolbar.
  2. Select the Save icon. You see a screen like the following:


  3. Select one of the following as the destination where you want to save your file:
    • USB or Network to save to a connected USB storage device or network folder
    • Computer to temporarily save the file on the projector and make it available for copying from a computer. After you copy the file, it is erased
      Note: You cannot save the file to a computer when the input source is USB Display or the HDBaseT control pad (BrightLink 1485Fi), or when you have split the screen into halves or quarters.
  4. Select the folder where you want to save your file.
  5. To enter a file name, select the File Name text box, use the on-screen keyboard to enter a file name.
  6. Select one of the following as the Range setting:
    • All to save all the pages in the current whiteboard session (PDF or EWF2)
    • Current to save only the current whiteboard page
  7. Select the file format. If you choose PDF or EWF2 (Epson Whiteboard Format), you can encrypt the file and add a password. If you choose EWF2, you can reopen the file later and continue editing.
    Note: JPG and PNG files are saved as 1920 × 1080 pixels.
  8. When you are ready to save the whiteboard pages, select Save or Next.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use