You can
select the settings for specifying a email directory server for
your projector.
Press the Menu button on
the remote control.
Select the Interactive
menu and press Enter.
Select Directory and
press Enter.
Select the following options as necessary:
Directory Access
Function specifies whether to search an active directory
server for user names and email addresses.
LDAP Server
let you enter the IP address or fully qualified domain name (FQDN)
for the LDAP server. You can enter up to 64 alphanumeric
characters. Do not use spaces or the following symbols: " * + , : ;
< = > ? [ \ ] ` |. If you specify an FQDN, you must configure
a DNS server.
Note: You
cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
Port Number lets you enter a port number for
the LDAP server. The default port is 389. Specify "3268" to search
the global catalog.
Authentication lets you set the type of
authentication expected by the LDAP server. If you are using
Digest-MD5 or Simple authentication and the LDAP Server setting is set to an IP address,
you must enable reverse DNS lookup on the DNS server.
User Name
lets you enter a user name for the mail server. You can enter up to
64 alphanumeric characters. Use one of the following methods when
entering the user name with the domain name: domain name\user name
or user name@domain name. Do not use a colon (":") or spaces.
Password
lets you enter a password for the LDAP server. You can enter up to
64 alphanumeric characters. Do not use a colon (":") or
spaces.
Check Connection tests the network
connection.
Search Base DN lets you enter the DN
(Distinguished Name) where the search for user names and email
addresses should start. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces. This field is
case-sensitive.
Note: Make
sure you specify the OU (Organizational Unit) and DC (Domain
Component) as necessary, with OU first in this format:
OU=accounts,DC=example,DC=com. The DN must be at or below the DC
level in the database structure.
User
Attributes lets you enter a user name, for example, "cn."
You can enter up to 64 alphanumeric characters. Do not use a colon
(":") or spaces. This field is case-sensitive.
Mail
Attributes lets you enter the attribute for the mail
address. You can enter up to 64 alphanumeric characters. Do not use
a colon (":") or spaces. This field is case-sensitive.
Group
Attributes lets you enter the attribute for the user group
name. You can enter up to 64 alphanumeric characters. Do not use a
colon (":") or spaces. This field is case-sensitive.
Search target
attributes lets you enter the search attributes for user
name, email address, and user group name. You can enter up to 64
alphanumeric characters. Do not use a colon (":") or spaces. This
field is case-sensitive.
Note: The
default value is "cn." You can specify up to three keys separated
by commas. Do not use three or more commas, commas right at the
start or the end, or continuous commas. The search is performed
using forward matching and returns all results that start with the
search keys.
Additional
filter lets you enter an additional filter to Search target attributes. You can enter up to
64 alphanumeric characters. Do not use a colon (":") or spaces.
This field is case-sensitive.
Note: Use the
displayed keyboard to enter the addresses. Press the arrow buttons
on the remote control to highlight numbers or characters and press
Enter to select them.
When you finish selecting settings, press the Menu button to exit the menus.