Administration Settings - Management Menu

Settings on the Management menu let you customize various projector administrative features.



Note: You must disable Schedule password protection to adjust the Schedule Settings settings.
Setting Options Description
User Button Light Source Mode

Information

Deinterlacing

Closed Caption

Resolution

Mic Input Level

Pattern Display

Auto Calibration

Display LAN Info.

Setting Plate Installation Guide

Assigns a menu option to the User button on the remote control for one-touch access (Auto Calibration is the default option)
User's Logo Start Setting

Reset

Creates the screen that the projector displays to identify itself and enhance security
User Pattern Captures a projected screen and saves it as a pattern for display; select Pattern Display in the Display menu to display the saved pattern
Control Panel Lock Full Lock

Except for Power

Off

Controls projector button locking to secure the projector

Full Lock: locks all buttons

Except for Power: locks all buttons except the power button

Off: no buttons locked

Color Uniformity Color Uniformity

Adjustment Level

Start Adjustments

Reset

Adjusts the color tone balance

Color Uniformity: set to On to adjust the color tone balance for the whole screen

Adjustment Level: sets the adjustment level

Start Adjustments: adjusts the red, green, and blue color tones individually for the selected area

Reset: resets all Color Uniformity adjustment values to their defaults

Color Matching

(BrightLink 1480Fi)

Adjustment Level

Red

Green

Blue

Brightness

Corrects the tint and brightness differences between images
Refresh Mode Timer

Messages

Start

Select Start to clear an afterimage that remains in the projected image and turn off the projector after the time specified in the Timer screen. Press any button to cancel Refresh Mode. Enable the Messages setting if you want to display a message when Refresh Mode is in progress.
Light Source Calibration Run Now

Run Periodically

Last Run

Selects options to perform light source calibration to maintain the color balance of the projected image

Run Now: Select On to start light source calibration now. Make sure the projector has been turned on for at least 20 minutes for maximum accuracy. You may not be able to start calibration if the projector's environmental temperature is out of range.

Run Periodically: Select On to perform calibration every 100 hours of usage

Last Run: Displays the date and time light source calibration was last performed

Date & Time Date & Time

Daylight Saving Time

Internet Time

Adjusts the projector's date and time settings
  • Date & Time: sets the date and time on the projector
  • Daylight Saving Time: enables daylight saving time
  • Internet Time: updates the time automatically via an online time server
Schedule Settings Schedules projector events to occur automatically at selected dates and times
Wireless LAN Power On

Off

Enables or disables wireless communication
Wireless LAN Diagnosis Ping

IP Address

Ping until stopped

Start

Displays the status of the wireless LAN communication
Log Save Destination Internal Memory

USB and Internal Memory

Selects where you want to save projector error and operation log files
Batch Setup Range All

Limited

Selects which projector menu settings to copy using the batch setup feature; select All to copy all the settings, or select Limited to copy all settings except for the following:
  • Password Protection settings
  • EDID setting in the Signal I/O menu
  • Network menu settings
Language Various languages available Selects the language for projector menu and message displays
Information Operation Hours

Light Source Hours

Estimated Remains

Source

Input Signal

Resolution

Refresh Rate

Sync Info

Video Signal

HDBaseT Signal Level (BrightLink 1485Fi)

Status

Serial Number

Event ID

Version

Displays information about the projector and current input signal; the displayed items vary depending on the current input source

The Version option displays version numbers for the projector and other components

Display Logs Temp Warning Info

Power On/Off History

Displays log data saved to the location specified in the Log Save Destination setting
Reset Management Settings Resets all settings on the Management menu to their default values except for the following:
  • Schedule Settings
  • Language
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use