This projector is a Class 2
laser product that complies with the IEC/EN60825-1:2007 international standard for lasers.
Follow these safety instructions when using the projector.
Warning:
Possibly hazardous optical radiation emitted from this product. Do
not look at operating light source. Eye injury may result.
- If an
error occurs in the projector or Touch
Unit, turn off the power and unplug the projector
and Touch Unit immediately. Continuing to
use the projector or Touch Unit could
result in an electric shock, fire, or visual impairment. Contact
Epson support.
- Do not
attempt to disassemble or modify the projector or
Touch Unit. The projector contains a high-power laser
component. Serious injury could result.
- Do not
look into the lens during projection. Also, do not look into the
lens using optical devices, such as a magnifying glass or
telescope. This could cause visual impairment.
- Do not place flammable objects in front of the lens.
Objects could catch fire.
- When
turning on the projector at a distance using the remote control,
make sure no one is looking into the lens.
- Do not
allow small children to operate the projector. Children must be
accompanied by an adult.
- Do not
apply optical devices, such as a magnifying glass or reflector, to
the projected image. Using the projector may result in physical
harm, fire, or an accident.
- Do not block the light from the lens during
projection. The high temperature in this area could cause burns,
fire, or other damage. The lens may overheat due to the reflected
light and could cause the projector to malfunction.
- Before
using the projector, make sure there is nothing in the area that
could reflect the projected image.
- When
disposing of the projector, do not disassemble it. Dispose of the
projector in accordance with your local or national laws and
regulations.
Labels are attached to the projector to indicate it
is a Class 2 laser product and complies with FDA performance
standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007: