Starting a PC Free Slideshow

After connecting a USB device or digital camera to the projector, you can switch to the USB input source and start your slideshow.
Note: You can change the slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter.
Note: You can also use the interactive pen or your finger to operate the slideshow.
  1. Press the USB button on the projector remote control until the PC Free file list appears.
    The PC Free screen appears.


  2. Do the following as necessary to locate your files:
    • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press Enter.
    • To move back up a folder level on your device, highlight Back to Top and press Enter.
    • To view additional files in a folder, highlight Next page or Previous page and press Enter.
    • To display images from a different USB drive, select Select Drive at the top of the PC Free screen and press Enter.
  3. Do one of the following:
    • To display an individual image, press the arrow buttons to highlight the image and press Enter. (Press the Esc button to return to the file list screen.)
    • To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow option at the bottom of the screen and press Enter.
    Note: If any file names are longer than the display area or include unsupported symbols, the file names may be shortened or changed only in the screen display.
  4. While projecting, use the following commands to control the display as necessary:
    • To rotate a displayed image, press the up or down arrow button. You can also rotate the image by flicking it with the interactive pen or your finger.
    • To move to the next or previous image, press the left or right arrow button. You can also move between images by flicking the image with the interactive pen or your finger.
    Note: You can use the Freeze, A/V Mute, and E-Zoom functions while projecting in PC Free mode.
  5. To stop the display, follow the on-screen instructions or press the Esc button.
  6. Turn off the USB device, if necessary, and then disconnect the device from the projector.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use