Connecting a Printer to the Control Pad

You can connect an Epson printer or all-in-one device to the USB-A port on the control pad (BrightLink 1485Fi) and use it to print your projected and annotated content. Make sure the printer meets the control command requirements.
Note: You can connect a wireless printer by selecting Network Printer as the Print > Printer setting in the Interactive menu.
  1. Connect a USB cable to one of the USB-A ports on the projector and to the USB-B port at the top of the control pad.
  2. Connect another USB cable to the USB-A port on the bottom of the control pad. Make sure the cable is no longer than 16.4 ft (5 m).
  3. Connect the other end of the cable to the USB Type B port on the printer.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use