If a scanned image appears distorted or blurry, try these
solutions:
- Make sure your original is not wrinkled or warped. This may
prevent the original from laying flat when passing over the scanner
sensors.
- Do not move
your original or your scanner during scanning.
- Your product
will not operate properly while tilted at an angle. Place your
product on a flat, stable surface that extends beyond its base in
all directions.
- Select
Settings > Scanner Settings > Scan Settings, adjust the following settings,
and try scanning again:
- On the Main Settings tab, try
increasing the Resolution
setting.
- On the Main Settings tab, make
sure you select the correct Image
Type for your original.
- If the Image Type is set to
Black & White, adjust the
Threshold setting on the
Advanced Settings tab. (The
Image Option must be set to
None.)
- If the
Image Type is set to Color or Grayscale, select the Unsharp Mask setting on the Advanced Settings tab. Change the Text Enhancement setting to High.