Changing the Image Aspect Ratio

You can only change the aspect ratio to resize the displayed image. The input signal must be low resolution.
Note: Aspect setting adjustment is only available when projecting from an HDMI source. You may not be able to change the Aspect setting depending on the input signal from the HDMI source. When a 4K image signal is being input, you can only select the Normal setting.
  1. Turn on the projector and switch to the image source you want to use.
  2. Press the Menu button on the projector's control panel or remote control.
  3. Select the Signal menu and press Enter.


  4. Select Aspect and press Enter.
  5. Select the aspect ratio you want to use for your input signal and press Enter.
  6. Press Menu or Esc to exit the menus.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use