You can use the Image Shift feature to adjust the image position without moving the projector.
Note: This
feature is not available if the Zoom option is set to the widest
setting.
Note: Images
are not stable immediately after turning the projector on. Wait at
least 20 minutes after starting projection to adjust the image
position. The Image Shift setting is stored even after the
projector is turned off. If you change the projector's installation
position or angle, you may need to make adjustments again.
- Turn on the projector and display an image.
- Press the Menu button on the projector's control panel or remote control.
- Select Settings and press Enter.
- Select Image Shift and press Enter.
- Use the arrow buttons on the projector or remote control to adjust the image position.
- When you are finished, press the Menu button to exit.
