Connecting a Streaming Device

You can connect a streaming device to the projector's HDMI3 port. Connecting the USB power cable provides power to the streaming device.
Note: The illustrations below show the streaming device included with LS500WATV/BATV models. If you are connecting a different streaming device and it does not have a USB 2.0 Micro-B power port, use the USB power cable that came with the device.
Note: For LS500WATV/BATV models, the projector remote control must be paired to the included streaming device to use Android TV and video-on-demand features. Follow the on-screen instructions or see the link below.
  1. Remove the front cover from the projector.


  2. Remove the storage space cover.


  3. Connect the HDMI extension cable to the HDMI3 port and the USB power cable to the DC Out (2.0A) port.


  4. Connect the streaming device to the HDMI extension cable.


  5. Connect the USB power cable to the streaming device's USB power port.


  6. Fit the device securely inside the storage space by arranging the cables as shown.


    Note: Do not force the device into the projector; you may damage the projector and/or the device.
  7. Replace the storage space cover as shown.


    Note: Make sure to clear the cables or the cover will not close.
  8. Replace the front cover of the projector.


Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use