| Blue |
Blue |
Off |
Off |
Normal operation. |
| Blue |
Flashing |
Off |
Off |
Warming up. Wait for an image to appear. |
| Shutting down. (When the Status light stops flashing,
you can unplug the projector.) |
| Blue/Off |
Off |
Off |
Off |
Standby mode or monitoring. |
| Flashing |
Off |
Off |
Off |
Preparing for monitoring or quick startup mode; all
features are disabled. |
| Flashing |
Varies |
Off |
Flashing |
Projector is too hot. If the temperature continues to
rise, projection will stop automatically.
- Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby objects.
- Clean or replace the air filter.
- Make sure the environmental temperature around the
air intake vents is not too hot.
|
| Off |
Flashing |
Off |
Solid |
Projector has overheated and turned off. Leave it
turned off to cool down and wait about five minutes. After the fan
has stopped, disconnect the power cord and do the following:
- Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby objects.
- Make sure the environmental temperature around the
air intake vents is not too hot.
- Clean or replace the air filter.
- If operating the projector at high altitude, turn on
High Altitude Mode.
- If the problem persists, unplug the projector and
contact Epson for help.
|
| Flashing |
Varies |
Flashing |
Off |
Laser warning. Turn the projector off, unplug it, and
contact Epson for help. |
| Off |
Flashing |
Solid |
Off |
Laser has a problem. Turn the projector off, unplug
it, and contact Epson for help. |
| Off |
Flashing |
Off |
Flashing |
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help. |
| Off |
Flashing |
Flashing |
Off |
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help. |
