If the "No Signal" message appears, try the
following solutions:
- Press the
Source button on the projector's
control panel or remote control repeatedly to cycle through the
available sources. Wait a few seconds for an image to appear on
each source you cycle through. - Press the
Home button on the projector's control
panel to select from a list of available sources (shown in black
text). - Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
- Check the connection from the projector to your video sources.
- If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
- If necessary, turn the projector and the connected computer or video source off and then on again.
- If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
- Try a different video cable.
- If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.