Changing the Scanner Position (DS-32000)

You can change the scanner position between Storage Mode, Normal Mode, and Delicate Mode depending on what types of originals you want to scan.

Changing the scanner position from Normal Mode to Storage Mode turns off the power and locks the output tray. Changing from Storage Mode to Normal Mode turns on the power and unlocks the output tray.

1 Storage Mode (power off and output tray locked)
2 Normal Mode (power on and output tray unlocked)
3 Delicate Mode (for scanning thin paper; reduced input tray capacity)
Note: When the scanner is in Storage Mode, the power turns off and the output tray is locked in position.
  1. Close the input and output trays.


  2. Lift the position selector lever on the back of the scanner.


  3. Rotate the scanner to the new position.


    Note: Do not touch the antistatic brush underneath the output tray.
  4. Release the lever and make sure the scanner locks into place.


  5. Depending on the position of the feed selector lever, the LCD screen may prompt you to move the lever to the correct position. In Delicate Mode, you can also use the icon to rotate the LCD screen.
Related tasks
Rotating the Control Panel (DS-32000)
Related references
Feed Selector Lever