You can keep
your prints on the roll until you manually cut them.
Turn off the Auto Cut setting in the printer driver or the
control panel, depending on the situation:
If you want to cut the paper manually, turn off the setting in
the printer driver. Select Advanced
> Roll Paper Option >
Auto Cut.
Note: The
Auto Cut setting in the printer
driver takes priority over the setting in the control panel. The
printer driver setting returns to automatic cutting when you close
the application.
If you are using a paper type that cannot be cut with the
built-in cutter, turn off the setting in the control panel. From
the roll paper information area, select Advanced Media Setting > Auto Cut > Off.
Print your document.
From the roll paper information area,
select Feed/Cut Paper.
To move the paper into a cutting
position, press and hold Forward or
Backward until the position at which
you want to cut appears at the dotted line as shown.
To cut the paper, select
Cut.
If the Auto Cut setting is
turned off only in the printer driver, the paper is cut and the
paper leading edge returns to the print wait position.
If the Auto Cut setting is
turned off in the control panel, select Cut to manually cut the paper with scissors or
select Print Cutting Guideline to
print a line on the paper to guide with manual cutting.