Replacing the Maintenance Box

Replace the maintenance box when a message is displayed on the LCD screen telling you that the maintenance box is near or at the end of its service life.
Note: You can view the replacement procedure on the LCD screen. Press the  home button if necessary and select Settings > Maintenance > Replace Maintenance Box > See Guide.
  1. Open the maintenance box cover on the back of the product.


  2. Pull out the maintenance box carefully without tilting it.


    Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.
  3. Remove the new maintenance box from the package.
    Caution:
    Do not touch the chip on the side of the maintenance box or you may damage the product.
  4. Align the groove on the maintenance box with the rails inside the product and insert it fully.


  5. Place the used maintenance box in the bag supplied with the new box and seal the bag.


    Note: Dispose of the used maintenance box carefully.
  6. Close the maintenance box cover.
Parent topic: Refilling Ink