If you see an error message telling you that the product's fax
memory is full, try these solutions:
If you set
the product to save received faxes in the product's memory or
inbox, delete any faxes you have already read.
Note: Your product
can store up to 200 faxes before its inbox is full.
If you set
the product to save received faxes on a computer, turn on the
selected computer. Once the faxes are saved on the computer, they
are deleted from the product's memory.
If you set the product to save received faxes on a USB device,
connect the selected USB device containing the save fax folder to
the product. Once the faxes are saved on the USB device, they are
deleted from the product's memory.
Note: Make sure
the USB device has enough available memory and is not write
protected.
If the
memory is full, try the following:
Send a monochrome fax using the direct sending feature
Send your faxes in smaller batches
If the
product cannot print a received fax due to a product error, such as
a paper jam, the memory full error may appear. Clear any product
errors, then ask the sender to resend the fax.