You can use the Image Shift feature to adjust the image position without moving the projector. Wait at least 30 minutes after you start projecting to adjust the image position.
Note: This
feature is not available if the Zoom option is set to the widest
setting.
- Turn on the projector and display an image.
- Adjust the image size using the W (Wide) and T (Tele) buttons. After you adjust the image size, the Image Shift screen is displayed automatically.
-
Use the arrow buttons on the projector or
remote control to adjust the image position.
Note: You can also use the Installation menu to adjust the Image Shift setting.
- Press Esc to close the Image Shift screen. The screen closes if no operation is performed for approximately 10 seconds.
