In
Whiteboard mode, you can use the 
Insert Image tool to insert an
image from a USB flash drive or a network folder. Images can be in
.png or .jpg format, with a maximum size of 2048 × 2048 pixels. You
can also scan a document or image into a new page using a supported
Epson all-in-one printer connected to the same network or the projector control pad (BrightLink
1485Fi+). Once the image is projected, you can move,
resize, or rotate it.
Insert Image tool to insert an
image from a USB flash drive or a network folder. Images can be in
.png or .jpg format, with a maximum size of 2048 × 2048 pixels. You
can also scan a document or image into a new page using a supported
Epson all-in-one printer connected to the same network or the projector control pad (BrightLink
1485Fi+). Once the image is projected, you can move,
resize, or rotate it.
Note: You can
also use the 
tool to the left of the toolbar
to import files (including .pdf files) in whiteboard mode.
tool to the left of the toolbar
to import files (including .pdf files) in whiteboard mode.Note: You
cannot scan with standalone scanners or printers that have run out
of ink or cannot print. Only Epson All-in-One products that support
ESC/P-R commands are supported. When importing from a scan, you
cannot use the scan button, the partial document or image scanning
function, or the Automatic Document Feeder (ADF), even if these are
available on your product.
- Select the Insert Image tool.
- Do one of the following:
- Select USB or Network, then locate and select the image you want to add.
- Load your original in the scanner, select Scan, and choose the settings for the scanned image as necessary.
- Select Open or Scan. After a moment, the image appears on the whiteboard page.
- Select the
Select tool and do any of the
following as necessary:
- Use the menu in the bottom
right corner of the image to select any of the following as
necessary:
- Duplicate creates a copy of the image on the current whiteboard page.
- Copy copies the image on the whiteboard. Touch a location on the screen to paste a copy of the image.
- Paste creates a new copy of the image. Drag the image to the desired location.
- Delete removes the image from the whiteboard.
icon at the top of the image and
drag left or right.