| Setting | Options | Description |
|---|---|---|
| Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
| SSID | Up 32 alphanumeric characters | Manually set the SSID (network name) of the wireless LAN system the projector is connecting to |
| Security | WPA2/WPA3-PSK
WPA2/WPA3-EAP WPA3-PSK WPA3-EAP Open |
Selects the type of security used on the wireless
network
WPA2/WPA3-PSK: uses WPA2/WPA3 personal mode; encryption is dependent on the access point settings; Passphrase must be the same as the access point WPA2/WPA3-EAP: uses WPA2/WPA3 enterprise mode; encryption is dependent on the access point settings WPA3-PSK: uses WPA3 security with AES for encryption. Use the Passphrase value to establish a connection from a computer WPA3-EAP: uses WPA3 enterprise mode; encryption is dependent on the access point settings |
| Passphrase | Various passphrases from 8 to 32 characters (from a web browser, the maximum is 63 characters) | Selects the pre-shared key used on the network; passphrases are case-sensitive. If the network settings are reset after the passphrase has been changed more than once, the first passphrase is restored. This setting is only displayed when Security is set to WPA3-PSK or WPA2/WPA3-PSK. |
| EAP Method | EAP Type
User name Password Client Certificate Verify Server Certificate CA certificate RADIUS Server Name |
Sets the EAP settings for WPA3-EAP and WPA2/WPA3-EAP security |
| IP Settings | DHCP (On or Off)
IP Address Subnet Mask Gateway Address |
Selects DHCP if your network assigns IP addresses automatically, or turns off DHCP so you can enter the network's IP address, subnet mask, and gateway address as needed |
| DNS Server 1/ DNS Server 2 | Various IP addresses | Sets the IP address for the DNS server using 0 to 255 for each address field. The DNS server resolves the host name |
| IPv6 | On
Off |
Enables IPv6 to allow monitoring and control of the projector over a network using Epson Web Control and PJLink |
| Auto Configuration | On
Off |
Selects whether to automatically assign addresses according to the Router Advertisement |
| Use Temporary Address | On
Off |
Enables use of a temporary IPv6 address |
| IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen and Home screen |