You can
create a Quick Wireless Connection USB Key to quickly connect the
projector to a Windows computer wirelessly. Then you can project
your presentation and remove the key when you are done.
Create a Quick Wireless
Connection USB Key with a USB flash drive and the Epson iProjection
(Windows) software.
Note: A USB
flash drive is not included with your projector.
Note: See the
online Epson iProjection Operation Guide for
instructions.
Make sure the wireless LAN
module is installed in your projector.
Turn on the projector.
Press the LAN button on the remote control. The
LAN standby screen is displayed.
Verify the SSID and IP
address.
Insert the USB key into the projector's USB-A1 port.
Note: If the
control pad is connected to the projector, you can connect the USB
key to the USB-A port on the
control pad instead.
You see a projected message that the network information update is
complete.
Remove the USB key.
Insert the USB key into a USB port on your
computer.
Follow the on-screen instructions to install the Epson
iProjection software.
Note: If you
see a Windows Firewall message, click Yes to disable the firewall. You need
administrator authority to install the software. If it is not
installed automatically, double-click MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the
projector. If it does not appear, press the LAN or Source
Search button on your remote control or restart your
computer.
Run your presentation as necessary.
When you finish projecting wirelessly, select the
Safely Remove Hardware option in
the Windows taskbar, then remove the USB key from your
computer.
Note: You can
share the USB key with other computers without disconnecting your
computer. You may need to restart your computer to reactivate your
wireless LAN connection.