If
you connected your computer to a Computer or HDMI port on the projector, you also need to
connect the USB cable so you can use the pens and your fingers with
your computer.
Note: A Touch
Unit is optional for the BrightLink 1480Fi+
and must be installed for finger touch operation.
Note: If your
computer is connected to an HDMI input on the control pad
(BrightLink 1485Fi+), connect the
computer's USB cable to the control pad's USB-B port.
-
Connect the USB cable to your projector's
USB-B1 port.
Note: If your computer is connected to the projector's HDMI3 port, connect the USB cable to the projector's USB-B2 port. You can change the HDMI port associated with the USB-B2 port by changing the USB-B2 setting in the projector's Pen/Touch > PC Interactivity menu.
- Connect the other end to any available USB port on your computer.
