Cleaning the Scanner Glass

You can clean the scanner glass if your copies or scanned images are smeared.
Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it.
  1. Open the document cover.

  2. Remove the cleaning cloth from its holder.

  3. Use the cleaning cloth to wipe the scanner glass and the glass area on the left.
    Note: If the glass is stained with grease or dirt, use a small amount of glass cleaner on a soft, dry cloth to remove it. Wipe off all remaining liquid after removing the dirt.
    Do not spray glass cleaner directly on the glass and do not press the glass surface with any force.

  4. Return the cleaning cloth to its holder when you are finished.
  5. Close the document cover.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use