Adjusting the Print Quality Using the Product Control Panel

You can adjust the print quality using the control panel on your product.
  1. Make sure there are no errors on the LCD screen.
  2. Load a few sheets of plain paper in the product.
  3. Press the  home button, if necessary.
  4. Select Settings > Maintenance > Print Quality Adjustment.
  5. Follow the on-screen instructions to print an alignment sheet.
    Note: Do not cancel printing while you are printing head alignment patterns.
  6. Check the printed patterns on the alignment sheet and select number of the best printed pattern for each set:
    • Select the number representing the pattern with the least amount of separation or overlap.


    • Select the number representing the pattern with the least misaligned vertical line.


    • Select the number representing the pattern with the least amount of separation or overlap.


  7. Continue following the on-screen instructions to finish the print quality adjustment.
Parent topic: Print Quality Adjustment
Related information
Loading Paper
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use