Configuring a Product IP Address
Using EpsonNet Config
You can
configure the product's IP address using EpsonNet Config.
Turn on the product.
Connect the product to a network using an Ethernet
cable.
Do one of the following to start EpsonNet Config:
Windows 10:
Click > All Apps > EpsonNet > EpsonNet Config.
Windows
8.x: Navigate to the Apps
screen and select EpsonNet >
EpsonNet Config.
Windows (other
versions): Click or Start and select All Programs or Programs. Select EpsonNet > EpsonNet Config.
Mac: Open
the Applications folder, open the
Epson Software folder, and select
EpsonNet > EpsonNet Config > EpsonNet Config.
After a few moments, the program displays the connected
products.
Double-click the product
you are configuring.
Note: If
several products of the same model are connected, you can identify
them by their MAC address.
From the menu on the left,
under TCP/IP, select Basic. You see a window like this:
Select Manual.
Enter the product's
IP address, Subnet Mask, and Default Gateway settings in the fields
provided.
Note: To
connect the product to a secure network, enter a static IP address.
You can also configure the DNS settings by selecting DNS, and enter proxy settings by selecting
Internet from the TCP/IP menu.
Select Send.
Enter the current
administrator password if necessary, and click OK.