IEEE 802.1X Network Settings

You can configure these IEEE 802.1X network settings in Web Config.

Setting Options/Description
Connection Method Displays the current network connection method
EAP Type Select one of these authentication methods for connections between the product and a RADIUS server:

EAP-TLS or PEAP-TLS: You must obtain and import a CA-signed certificate

PEAP/MSCHAPv2 or EAP-TTLS: You must configure a password

User ID Enter an ID between 1 and 128 ASCII characters for authentication on a RADIUS server
Password Enter a password between 1 and 128 ASCII characters for authentication of the product. If you are using Windows as a RADIUS server, enter up to 127 ASCII characters.
Confirm Password Enter the authentication password again
Server ID Enter a server ID between 1 and 128 ASCII characters for authentication on a specified RADIUS server; server ID is verified in the subject/subjectAltName field of a server certificate sent from the RADIUS server
Certificate Validation Select a valid certificate regardless of the authentication method; import the certificate using the CA Certificate option
Anonymous Name If you selected EAP-TTLS, PEAP-TLS or PEAP/MSCHAPv2 as the Authentication Method setting, you can configure an anonymous name between 1 and 128 ASCII characters instead of a user ID for phase 1 of a PEAP authentication
Encryption Strength Select one of the following encryption strengths:

High for AES256/3DES

Middle for AES256/3DES/AES128/RC4

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use