Turning Off the Projector

Turn off the projector after use.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
  1. Press the  power button on the projector or the projector remote control.
    The projector displays a shutdown confirmation screen.

  2. Press the  power button again. (To leave it on, press any other button.) The laser turns off and all lights turn off.
    Do not turn the projector on immediately after turning it off. Turning the projector on and off frequently may shorten the life of the laser.
    Note: If the USB Power in Standby setting is enabled, the power light will stay on when the projector is in standby or sleep mode.
  3. To transport or store the projector, make sure the  power light is not flashing and the status light is off, then unplug the power cord.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use