Scanning Originals to the Computer

You can scan an original from the control panel using jobs created in Document Capture Pro or Document Capture. Set the operation mode on the control panel before scanning.
  1. Make sure you installed the product software and connected the product to your computer or network.
    Note: Restart your computer after installing the product software to enable scanning from the control panel.
  2. Place your original on the product for scanning.
  3. Press the  home button, if necessary.
  4. Use the arrow buttons to select Computer and press OK.
  5. Select the computer on which you created the jobs in Document Capture Pro or Document Capture.
    Note: If the scanner is connected via USB or the operation mode is set to Server, you do not need to select a computer.
  6. On the Select Job screen, use the arrow buttons to select the job you want to use.
  7. If you want to change the scan settings, press the down arrow and use the arrow buttons to select from the following options:
    • To slow down the scanning speed, set the Slow setting to On.
    • To skip double feed detection when scanning originals such as envelopes or plastic cards, set the DFDS Function setting to On.
    • To stop scanning when a double feed is detected, select Double Feed Stop Timing and press OK. Use the arrow buttons to select a timing option.
    • To stop scanning when a paper feed error is detected or the original is fed askew, select Paper Protection and press OK. Use the arrow buttons to select the setting you want to use.
      Note: Turning this function on will not always prevent damage to your originals.
    • To detect dirt on the glass surface inside the product, select Detect Glass Dirt and press OK. Use the arrow buttons to select the setting you want to use.
    • To detect a double feed error when scanning multiple originals, set the Ultrasonic Double Feed Detection setting to On.
    • To set a timeout when using the Automatic Feeding Mode, select Automatic Feeding Mode Timeout and select the settings you want to use.
      Note: This setting is available when you scan from the Quick Send buttons or Presets.
  8. Press the OK button to view the job settings.
  9. Use the arrow buttons to scroll through the job settings and make any desired changes.
    Note: If Disable job setting changes on control panel is set to On in Document Capture Pro or Document Capture, you cannot change the settings.
  10. Press the start button to start scanning.
Parent topic: Scanning Using the Product Control Panel