You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu.
Select Version to display the projector's firmware version. Select Projector Info to display the settings described below.
Note:
Available settings depend on the current input source. The lamp
usage timer does not register any hours until you have used the
lamp for at least 10 hours.
| Information item | Description |
|---|---|
| Lamp Hours | Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon |
| Source | Displays the name of the port to which the current input source is connected |
| Input Signal | Displays the input signal setting of the current input source |
| Resolution | Displays the resolution of the current input source |
| Scan Mode | Displays the scan mode of the current input source |
| Refresh Rate | Displays the refresh rate of the current input source |
| Sync Info | Displays information that may be needed by a service technician |
| Color Depth | Displays the color depth |
| Status | Displays information about projector problems that may be needed by a service technician |
| Serial Number | Displays the projector's serial number |