Input Signal Settings - Signal Menu

Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.



To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description
Aspect See the list of available aspect ratios Sets the aspect ratio (width-to-height ratio) for the selected input source
Overscan Auto

Off

4%

8%

Changes the projected image ratio to make the edges visible by a selectable percentage or automatically
Advanced Video Range

Sets the video range to match the setting of the device connected to the HDMI input port

Auto: detects the video range automatically

Limited: for images from a device other than a computer; can also be selected if the black areas of the image are too bright

Full: for images from a computer; can also be selected if the image is too dark

EDID Selects EDID settings

Normal: supports 3840 × 2160 30 Hz signals

21:9: supports 2560 × 1080 60 Hz signals

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use