Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.
  1. Press the Menu button.
  2. Select the Network menu and press Enter.
  3. Select Network Configuration and press Enter.
  4. Select the Notifications menu and press Enter.


  5. Turn on Mail Notification.
  6. Enter the IP address for the SMTP Server setting.
    Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
  7. Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).
  8. Enter the sender's email address as the From setting.
  9. Choose an Address Setting field, enter the e-mail address, and select or deselect the alerts you want to receive there. Your e-mail address can be up to 32 alphanumeric characters long. Repeat for up to three addresses.
  10. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Parent topic: Using the Projector on a Network
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use