Turning On Auto Iris

In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project.
  1. Turn on the projector and switch to the image source you want to use.
  2. Press the Menu button.
  3. Select the Image menu and press Enter.


  4. Select the Auto Iris setting and choose one of the following:
    • Normal for standard brightness adjustment.
    • High Speed to adjust brightness as soon as the scene changes.
    Note: You can set Auto Iris for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting.
  5. Press Menu or Esc to exit the menus.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use