Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports (Home Cinema 1080). Connect the projector to the video source using an RCA audio cable.
Note: Make sure the audio cable is labeled "No Resistance."
Note: If you connected your video source to the projector using an HDMI cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound.
  1. Connect the audio cable to your video source's audio-out ports.
  2. Connect the other end of the cable to the projector's L and R audio ports.



Parent topic: Connecting to Video Sources
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use