If you have
a WPS-enabled wireless router, you can use Wi-Fi Protected Setup
(WPS) to connect your scanner to the network.
- Select the
home icon, if necessary.
- Press the
icon.
- Select Router.
- Select Start
Setup or Change
Settings.
- Select
Push Button Setup (WPS).
- Follow
the instructions on the LCD screen to complete WPS setup.
Note: Make sure
you press Start Setup within two
minutes of activating WPS on your router.
- Select the
return home icon to return to
the home screen.
The
Wi-Fi icon displayed on the LCD
screen indicates your wireless connection status. If the product is
not connected to the network, repeat these steps to try
again.