Blending the Image Edges

You can use the projector's Edge Blending feature to create a seamless image from multiple projectors.
Note: Before performing Edge Blending, set the Color Mode setting to Multi-Projection to make more precise adjustments.
  1. Press the Menu button.
  2. Select the Extended menu and press Enter.
  3. Select the Multi-Projection setting and press Enter.
  4. Select the Edge Blending setting and press Enter. You see this screen:


  5. Turn on the Edge Blending, Line Guide, and Pattern Guide settings.
  6. Select the edge you want to blend on each projector and press Enter. For the projector on the left, select the Right Edge and for the projector on the right, select Left Edge. You see a screen like this:


  7. Select the Blending setting and select On.
  8. Press Esc to return to the previous screen.
  9. Select the Blend Start Position setting and adjust the point where edge blending begins.
  10. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so that the displayed guides are at the edges of the overlapping area between the two images.


  11. Press Esc to go back to the previous screen.
  12. Select the Blend Curve setting and select a gradient for the shaded area on the projectors.
  13. When the edges are blended, turn off the Line Guide and Pattern Guide settings on each projector to check the final settings.
  14. When you are finished, press the Menu button.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use