| 1 |
|
IEC60417
No.5007 |
"ON" (power)
To indicate connection to the mains. |
| 2 |
|
IEC60417
No.5008 |
"OFF" (power)
To indicate disconnection from the mains. |
| 3 |
|
IEC60417
No.5009 |
Stand-by
To identify the switch or switch position by means of
which part of the equipment is switched on in order to bring it
into the stand-by condition. |
| 4 |
|
ISO7000
No.0434B
IEC3864-B3.1 |
Caution
To identify general caution when using the
product. |
| 5 |
|
IEC60417
No.5041 |
Caution, hot surface
To indicate that the marked item can be hot and should
not be touched without taking care. |
| 6 |
|
IEC60417
No.6042
ISO3864-B3.6 |
Caution, risk of electric shock
To identify equipment that has risk of electric
shock. |
| 7 |
|
IEC60417
No.5957 |
For indoor use only
To identify electrical equipment designed primarily
for indoor use. |
| 8 |
|
IEC60417
No.5926 |
Polarity of DC power connector
To identify the positive and negative connections (the
polarity) on a piece of equipment to which a DC power supply may be
connected. |
| 9 |
|
— |
Same as No. 8 |
| 10 |
|
IEC60417
No.5001B |
Battery, general
On battery powered equipment. To identify a device for
instance a cover for the battery compartment, or the connector
terminals. |
| 11 |
|
IEC60417
No.5002 |
Positioning of cell
To identify the battery holder itself and to identify
the positioning of the cell(s) inside the battery holder. |
| 12 |
|
— |
Same as No. 11 |
| 13 |
|
IEC60417
No.5019 |
Protective earth
To identify any terminal which is intended for
connection to an external conductor for protection against electric
shock in case of a fault, or the terminal of a protective earth
electrode. |
| 14 |
|
IEC60417
No.5017 |
Earth
To identify an earth (ground) terminal in cases where
neither the symbol No.13 is explicitly required. |
| 15 |
|
IEC60417
No.5032 |
Alternating current
To indicate on the rating plate that the equipment is
suitable for alternating current only; to identify relevant
terminals. |
| 16 |
|
IEC60417
No.5031 |
Direct current
To indicate on the rating plate that the equipment is
suitable for direct current only; to identify relevant
terminals. |
| 17 |
|
IEC60417
No.5172 |
Class II equipment
To identify equipment meeting the safety requirements
specified for Class II equipment according to IEC 61140. |
| 18 |
|
ISO 3864 |
General prohibition
To identify actions or operations that are
prohibited. |
| 19 |
|
ISO 3864 |
Contact prohibition
To indicate injury that could occur due to touching a
specific part of the equipment. |
| 20 |
|
— |
Never look into the optical lens while the projector is
on. |
| 21 |
|
— |
To indicate that the marked item don’t place anything
on projector. |
| 22 |
|
ISO3864
IEC60825-1 |
Caution, laser radiation
To indicate the equipment has a laser radiation
part. |
| 23 |
|
ISO 3864 |
Disassembly prohibition
To indicate a risk of injury, such as electric shock,
if the equipment is disassembled. |
| 24 |
|
IEC60417
No. 5266 |
Standby, partial standby
To indicate that part of the equipment is in the ready
status. |
| 25 |
|
ISO3864
IEC60417
No. 5057 |
Caution, movable parts
To indicate that you must keep away from movable parts
according to protection standards. |
| 26 |
|
IEC60417-6056 |
Caution (Moving Fan Blades)
To indicate that you must keep away from moving fan
blades. |
| 27 |
|
IEC60417-6043 |
Caution (Sharp Corners)
To indicate that you must not touch sharp
corners. |
| 28 |
|
— |
To indicate that looking into the lens while projecting
is prohibited. |
| 29 |
|
ISO7010
No. W027
ISO3864 |
Warning, light emission (UV, visible light, IR, etc.)
When you are close to the light emissions, be careful
not to injure your eyes or skin. |
| 30 |
|
IEC60417
No. 5109 |
Usage prohibition in residential areas
To indicate that this is an electrical device or a
device that is not suitable for use in residential areas. |
